Static Control/ ESD Ionizers
Air Ionizing Cartridge
Ion Systems’ self-contained compressed air ionizing cartridge controls static charge in production, packaging, laboratory and other environments where static build-up can cause contamination, ESD, material handling problems or microprocessor lock-up. Compact and rugged, the cartridge can be used either for in-line ionization or as an ionizing blowoff gun. For in-line use, connect the Ion-6110 to compressed air source and it is ready to ionize any type of production equipment. Or attach the cartridge to an ordinary air gun and the airstream is ionized for effective particle removal. An internal sensor initiates ionization only when the gun is triggered, ensuring on demand control of static charge.
Patented IsoStat Technology
The ION-6110's patented IsoStat technology guarantees intrinsically balanced ionization and eliminates complicated feedback circuits. Ionizers incorporating this technology never need calibration and require very little maintenance. IsoStat is based on a law of physics, Conservation of Charge, which states that charge cannot be created or destroyed in an isolated system. By isolating the ionizer’s emitter points from ground, IsoStat ensures equal numbers of positive and negative ions to better protect sensitive products.
High Reliability
Patented IsoStat technology makes The ION 6110's blowers the most reliable ionizers available. IsoStat enables them to operate without grounding wires or cables and still maintain ionizer balance. The ION 6110's internal emitter points are electrostatically shielded to eliminate field-induced charging. Steady-state DC ion emission provides fast discharge with low airflow, for greater operator comfort.
FEATURES:
- IsoStat® Technology
- Internal air flow sensor
- Shielded emitter points
- Compact size
- Optional blow-off gun kit
- Audio or visual notification of system failure not included with this model
BENEFITS:
- Intrinsically balanced; no calibration needed
- On-demand ionization during gun operation
- No shock hazard
- Adapts to compressed air lines
- Fits any air gun
Applications:
In-line ionization. Reduces ESD damage and microprocessor lock-up in:
- IC packaging and marking
- Surface-mount equipment
- Device testing equipment
Ionizing blow-off gun. Removes particles in:
- Printed circuit board assembly
- Medical device manufacturing
- Film processing
SPECIFICATIONS:
Input | 24 VAC, less than 1 watt, from wall transformer |
---|---|
Power Source | Wall transformer: 120 VAC (powers up to 10 units), 230 VAC model available |
Power |
Indicator Green LED |
Ion Emission | Steady-state DC |
Emitter Points | Permanent tungsten alloy, estimated life:5 years of continuous use |
Ion Balance | Better than ±25 volts at 6 inches |
Discharge Time | ±1,000 volts to 100 volts |
Air Flow |
Requirements At least 2 scfm |
Air Line Requirements | 1/4" NPT female (input and output); 1/8" NPT adapter available |
Internal Sensor | Turns ionizer off when air is not flowing; model without sensor also available for continuous flow applications |
Dimensions | 2.2"D x 3.1"L (5.6 x 7.9 cm) not including fittings |
Weight | 6 oz. (170.1 g) |
Warranty | 2-year limited warranty |
Certifications | |
Wall Transformer | |
Input | 120 VAC, 50/60 Hz, 32 watts, alternate transformer available for 230 VAC operation; powers up to four 6110(a) cartridges with an optional Y connector |
Output | 24 VAC, 1.0 amp |
Cabling | 8' (243.8 cm) cable with RJ-11 connectors; custom lengths available |
Dimensions | 3.2"H x 2.5"W x 1.9" D (8.1 x 6.6 x 4.8 cm) |
Weight | 1 lb. (454 g) |
Certifications | (120 VAC model) |
Testing
was performed at high speed with a charged plate monitor
in accordance with Ionization Standard ANSI EOS/ESD S3.1- 1991 of the ESD Association. |